Works with·Your kit, not ours
The cameras you already own.
One page per recorder family, so you can check yours before you install anything. The short version: type the recorder’s login and the connector finds the channels itself — then shows you a photo from every one before a single camera is set up.
Recorders we walk channel by channel
One login, every channel — nothing guessed.
Hikvision
+ HiLook, Annke
Does it work? →Dahua
+ Lorex, Amcrest
Does it work? →Reolink
NVR & standalone
Does it work? →Uniview
UNV recorders
Does it work? →Hanwha
Wisenet
Does it work? →Honeywell
30 / 35 Series
Does it work? →Axis
Network cameras
Does it work? →Amcrest
NVR & DVR
Does it work? →XMEye / iCSee
Budget DVRs
Does it work? →TVT / InVid
Swann family
Does it work? →Any ONVIF
The open standard
Does it work? →Old analog DVRs
No ONVIF needed
Does it work? →Reached over ONVIF instead
We don’t guess a recorder login for these. The cameras still work.
Bosch
ONVIF cameras yes, recorder login no — and why.
Read the reason →Avigilon
ONVIF cameras yes, recorder login no — and why.
Read the reason →Mobotix
ONVIF cameras yes, recorder login no — and why.
Read the reason →Ubiquiti
ONVIF cameras yes, recorder login no — and why.
Read the reason →Pelco
ONVIF cameras yes, recorder login no — and why.
Read the reason →What your cameras need
Four things, and most kit already has them.
- Reaches your recorder
- The cameras are already on the same network as the DVR or NVR.
- RTSP switched on
- Standard on every recorder here. Setup tells you if it's off.
- H.264 or H.265
- Anything from the last decade. Older MPEG-only kit won't work.
- Clock roughly right
- So the time on your alert matches the time on your footage.
Not listed anywhere here? Paste a stream link. Anything that speaks RTSP works, whatever the badge on the box says.
Or just install it and find out.
Ten minutes. If we can’t see your cameras, you don’t pay.