Works with·Pelco
Does it work with Pelco?
Pelco cameras work over ONVIF. We do not guess a Pelco recorder login, on purpose.
The honest answer
Pelco does not publish a recorder-level channel address we can verify, so we do not guess one. A guessed address that comes back "unauthorised" looks exactly like a wrong password, and enough of those will lock you out of your own recorder — which is a worse outcome than an honest no. Point the connector at the cameras directly over ONVIF instead, and they work fine.
Anything that speaks RTSP works if you paste the stream link yourself, whatever the badge on the box says.
What this kit needs
Four things, and most of it already has them.
- Reaches your recorder
- The cameras are already on the same network as the DVR or NVR.
- RTSP switched on
- Standard on every recorder here. Setup tells you if it's off.
- H.264 or H.265
- Anything from the last decade. Older MPEG-only kit won't work.
- Clock roughly right
- So the time on your alert matches the time on your footage.
What it costs to add these cameras
- Nothing per camera
- Unlimited cameras on every plan. The AI runs on a small computer beside your cameras, not in a data centre — cameras cost us nothing, so we don’t charge you for them.
- No new hardware
- The kit you already own stays exactly where it is. The only thing you install is the connector.
- Proof before setup
- Every channel proves a live frame before it becomes a camera, so you see a photo from each one before anything is created.
Or just install it and find out.
Ten minutes. If we can’t see your cameras, you don’t pay.